Independent contractors, licensed in CA

904 cities and towns covered

Chimney Crown Repair in California

Even without a freeze cycle, a cracked crown lets water into the structure every time it rains — and in seismic country it is also where movement shows first.

Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about crown repair

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Crown Repair in California

What to ask for on Chimney Crown Repair

  • Crack repair and flexible coating
  • Full recasting with a drip edge
  • Expansion joint at the flue tile
  • Usually paired with a cap and arrestor
Call us about this
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Unreinforced stack strapped to the framing in California
Unreinforced stack strapped to the framing Galvanized strapping and anchor plates worked through the attic — a day of work rather than a rebuild.
Spark arrestor to the specified aperture in California
Spark arrestor to the specified aperture Required across State Responsibility Areas, and the cheapest part on the chimney to get wrong.
Flexible coating over a repaired crown in California
Flexible coating over a repaired crown Bridges movement in a way rigid mortar cannot, which matters on a structure that keeps moving.

What a crown should be

The crown is the slab at the top that sheds rain away from the flue. What most older houses have instead is a thin mortar wash with no reinforcement, no expansion joint at the tile and no overhang — so it cracks around the tile and the water runs straight down the brick face.

A proper crown is cast, reinforced, sloped away from the flue, with a bond break at the tile and a projection past the masonry with a drip edge underneath.

Why flexible coatings suit California

Where a stack moves — seasonally, or in a quake — a rigid repair cracks again. A flexible crown coating bridges movement in a way mortar cannot, and on a structure that is going to keep moving it is frequently the more durable answer.

When it must be recast

Cracks wide enough for a coin, missing sections, no overhang at all, or break-up around the tile.

Crown work is roof work

Reaching a crown on a terracotta barrel tile roof means lifting tiles and walking battens rather than the tiles themselves, and a contractor who walks the tile will break a lot of it.

Do the cap and arrestor together

Same access, same visit, and in fire country the arrestor is a requirement anyway.

Check the courses below

Brick under a failed crown has usually been taking water for as long, and often needs attention as part of the same job.

Chimney Crown Repair — frequently asked questions

How do I know the crown is cracked?

Rarely from the ground. It needs a look from the roof or a drone. Indirect signs are water inside near the chimney or staining on the masonry.

Can I seal it myself?

A flexible coating on a sound crown is within reach of someone safe at height — but not on a tile roof, where the access itself is the hazard.

How long does a cast crown last?

Decades where correctly shaped. Flexible coatings are shorter-lived and are reapplied, which is the trade for accommodating movement.

Is the crown the same as the cap?

No. The crown is the masonry slab around the flue; the cap and arrestor sit over the opening.

Water only in heavy rain — is it the crown?

Probably the flashing instead. A cracked crown leaks in ordinary rain too, and on a tile roof flashing is the more common culprit.

Call now How it works