Covering 5 ZIP codes
Chimney Flashing Repair in Clovis, CA
Flashing under terracotta barrel tile is the hardest chimney detail in California roofing and the one most often bodged. Tiles have to be lifted and relaid, not bedded over.
- Covering 5 Clovis ZIP codes
- Free to use, no obligation
Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.
Call about flashing repair in Clovis
(844) 785-4066Free to use, and there is nothing to pay us. You are never committed to going ahead.
What happens when you call
- You describe the problem and where you are.
- We put you in touch with a licensed contractor covering that area.
- They arrange the visit and agree the price with you directly.
Worth having to hand
- Roughly how old the system is
- What it is doing — or not doing
- Your ZIP code
What to ask for on Chimney Flashing Repair in Clovis
- Step and counter-flashing done properly
- Reglet cut into the mortar or stucco
- Terracotta barrel tile detailing
- Coordinated with reroofing
- Licensed & insured We match you with contractors who hold current licensing and cover.
- Know what to ask Every page says what decides the price, so you can judge a quote.
- Free to use We never charge you. Compare quotes and walk away at any point.
- Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.
How it works
Three steps, no obligation at any of them.
-
1
Call and tell us what is wrong
Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.
-
2
A local contractor gets in touch
A local chimney company contacts you to discuss the problem and arrange a visit in Clovis. What they charge to attend or diagnose is theirs to set, so agree it with them up front.
-
3
You decide
Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.
What these repairs look like
Illustrative examples of the work described here. More in our disclaimer.
Chimney Flashing Repair in Clovis
Much of Clovis's housing was built before central cooling was normal and often before ductwork was, so heating and cooling arrived separately and at different times. That is why so many houses here run a boiler for heat and something entirely different for cooling.
35% of homes in Clovis heat with electricity, so a fireplace here is used by choice rather than by necessity and tends to be inspected far less often. (US Census ACS 2022)
Two layers, and a tile complication
Correct flashing is step flashing woven in with the roof courses as they climb the chimney, plus counter-flashing let into a groove cut in the mortar joint and folded down over it.
On barrel tile the tiles have to be lifted, the metal properly stepped and counter-flashed against the underlayment, and the tiles relaid. What happens instead, constantly, is that tile is bedded in mortar over the top of the joint. It sheds water for a year or two and then it does not.
On stucco chimneys
Counter-flashing has to be let into a cut reglet in the stucco and the render made good over it. Caulking metal to the face of stucco is not a detail, it is a delay.
Telling flashing from crown
Flashing leaks appear with wind-driven rain and often stop in ordinary showers. Crown leaks appear whenever it rains. A hose test working upward in sections separates them.
Coordinating with a reroof
The best moment to do chimney flashing is while the roof is open. The worst outcome is a roofer laying new covering over old flashing to save a day.
Raise it before the contract
Establish who is responsible for the chimney detail before roofing work is agreed. Split responsibility is how it ends up done badly by whoever gets there last.
Tile is reusable
Barrel tile that is carefully lifted can nearly always go back. Tile that is walked on cannot, and replacement tile on an older roof is frequently hard to match.
The full guide: everything about chimney flashing repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Clovis.
Areas we cover in Clovis
We work throughout Clovis, including the areas around Clovis Border, Clovis North / Buchanan area vicinity, Deauville / Heritage Grove pockets and Dry Creek / Clovis East vicinity.
Chimney Flashing Repair in Clovis — FAQs
What chimney problem is most common around Clovis?
Mandatory winter no-burn days, so an appliance has to be clean and compliant to be usable at all. That pattern is regional rather than universal — fresno, Bakersfield, Stockton, Modesto and the San Joaquin Valley. It is worth knowing before you book, because it tells you what someone should be looking hardest at here.
How much does chimney work cost in Clovis?
It depends entirely on what the chimney turns out to need, and the spread is wide. Sweeping, an inspection, a cap or a damper repair are the inexpensive end and are usually done in one visit. Relining, rebuilding above the roofline and full crown recasting are the expensive end. Nobody can quote it honestly over the phone, which is why the inspection comes first. The contractor you are introduced to sets their own prices and agrees them with you directly.
Do you cover all of Clovis?
Yes — all 5 ZIP codes in Clovis and the surrounding towns. Tell us where you are and we put you in touch with a company that covers it.
How quickly can someone get to me in Clovis?
For a routine inspection or sweep, usually within a few days, and sooner outside the fall rush. Late spring through early fall is the quiet season and the easiest time to book. If you have had a chimney fire, or you can smell gas or have a carbon monoxide alarm sounding, that is not a scheduling question — leave the building and call emergency services from outside.
My fireplace smokes into the room. What is wrong?
Several possible causes, and they need different work. A blocked cap or arrestor, a damper not opening fully, a smoke chamber that was never parged, a flue too small for the fireplace opening, or a chimney too short relative to the roof around it. A house sealed tight enough to run under negative pressure will also pull air down the flue. An inspection separates them; guessing does not.
Should the chimney be repaired or rebuilt?
It depends how far the damage goes. If a key scrapes mortar out but the brick is intact, that is repointing. Once brick faces have flaked through, a brick can be rocked by hand, or the stack leans, repointing has nothing sound to bond to and a rebuild is the honest answer. Most rebuilds stop at the roofline, because that is the section taking weather from every side.
Our roof is flat or low-slope.
A different detail again, involving base flashing carried up the stack with counter-flashing over it. It needs someone who works low-slope roofing.
Can flashing just be sealed?
As a stopgap before proper work, yes. As the repair, no — sealant over a flashing joint is the most common failed chimney repair there is.
Neighborhoods we cover in Clovis
Chimney work across Clovis and the areas around it.
- Clovis Border
- Clovis North / Buchanan area vicinity
- Deauville / Heritage Grove pockets
- Dry Creek / Clovis East vicinity
- East Clovis / Dry Creek area
- European Grove / Buchanan Estates fringe
- Fancher Creek
- Fowler Avenue corridor
- Harlan Ranch
- Herndon / Willow / Bullard corridor areas
- Letterman Park
- Locans
- Loma Vista area
- North Fresno
- Old Town Clovis outskirts
- Quail Lake / Woodward Park fringe
- Sierra Vista Mall
- Tarpey Village